Customized Height Outdoor Steel Tubular Pole ,Power Pole , Electrical Pole

Product Description

The products above are steel utility poles made specifically for Customized Height Outdoor Steel Tubular Pole, Power Pole, Electrical Pole

• Products are designed and manufactured according to ANSI/TIA-222-G structural standards
• Only our company can comply to these global manufacturing standards which gives us an edge over our competitors
• Products are hot dip galvanized according to ISO 1461/ASTM A123 standards
• Pole shaft material : ASTM GR65,GR50,Q460 A572,S355,Q345/Q235,etc
• Material code : GB/T1591-2008,GB/T700-2006
• We possess the ISO 9001:2015 certification and are committed to giving our customers the best products and service
• We provide additional assistance if required including supervision and supplementary components
• We accommodate various designs according to our customers’ specifications

To design in accordance with PLS software, we will require the following design parameters:

1. The operational wind speed of the region where the pole will be used
2. The Antenna load and height of the pole
3. The total height of the pole itself

Product Specifications

Packaging & Shipping

We cover the top and bottom parts of the pole with a mat or straw bale in order to protect it from damage to the galvanized surface that may occur during transportation. Packaging can also be done according to clients’ requirements.

3.1. Welding

The manufacturer shall be responsible for determining and for developing proper techniques to be used in the welding operations.

All welding shall be performed by welders, welding operators and tackers qualified for the type of welding to be performed. Qualifications shall be in accordance with EN1090 or AWS D1. 1.

All welding shall be performed in accordance with EN1090 EXC2 and EN1090 EXC3 for shaft to base flange, including procedure qualification.

Welding shall be done by the shield metal-arc, gas shielded flux core, gas shield metal-arc or submerged-arc processes.

3.1.1. Longitudinal Welds

Longitudinal welds will have sixty (60 %) per cent penetration minimum except in slip joint area of female section where the penetration shall be 100%.

3.1.2. Shaft to Base Plate Welds (if relevant)

Shaft to flange plate welds shall be one hundred percent (100 %) penetration welds for base plate if shaft’s thickness is equal or over 6mm.

If shaft’s thickness is less than 6mm, shaft to base plate welds will be fillet welds

Process of Production

Verification of Materials → Cutting → Molding or Bending → Vertical Welding → Verification of Dimensions → Flange Welding → Hole Drilling → Calibration→ Deburring Process → Galvanizing, Powder Coating or Painting → Recalibration → Threading → Packaging

FAQ

Our Service

1. We will reply all your enquiries in 24 working hours.

2. Experienced staff members will answer all your questions in fluent English.

3. Customized designs are available. UEM & UBM are welcome.

4. Exclusive and unique solutions can be provided to our customers by our well-trained and professional engineers and staff.

Welcome to our factory!

Our company focuses on manufacturing all kinds of metal poles. This includes steel power poles, street lamp poles, telecommunication poles and many more. Futao Metal Structures was founded in 2000 with one goal in mind - to provide quality products that you can count on. Since then, we have accumulated 18 years of experience in international trade while our products have been used in construction projects all over the world. We are committed to living by our company motto “Quality and Integrity above all else”.

We have deep technical knowledge in the field of power distribution, advanced production equipments and experienced staff. We strive to provide the best quality in all our products. Over the years, we have developed good relationships with customers from all over the world including southeast Asia, the Middle East, America and Africa.